|
|
| Type |
Smith
Design |
| Ratio,
W |
1.0,
1.4, 1.125, 0.95, 0.625 |
| Dial
Range |
0-80,
0-100, 0-120, 0-140, 0-160 Km/h |
| Diameter |
Ø
60mm / 80mm / 85mm / 100mm / 140mm |
| Sweep
Angle |
130°,
180°, 240°, 252°, 270°. |
| Odo
Meter |
5
/ 6 Digits |
| Movement |
Clock
wise / Anti Clock wise. |
| Suitable |
Car,
Jeeps, Truck, Tractor, 2 wheelers |
| Variations
of other ratios, sweep angles and odometer position can be supplied
on request. |
| |
|
| Type |
Smith
Design |
| Ratio,
W |
1.0,
1.2, 1.4, 1.125, 0.95, 0.625 |
| Dial
Range |
0-1000,
0-2500, 0-5000 RPMs |
| Diameter |
Ø
60mm / 80mm / 85mm / 100mm / 140mm |
| Odo
Meter |
5
/ 6 Digits |
| Movement |
Clock
wise / Anti Clock wise. |
| Suitable |
Tractor,
Stationery Engines, Constant Machinery |
| |
|
 |
| Type |
Centre
Zero, Moving Magnet Type |
| Dial
|
30-0-30,
50-0-50, 80-0-80 Amp, Aluminium. Back lit. LED Type. |
| Sweep
Angle |
66°,
76°, 84°, 90°. |
| Voltage |
12V,
24V |
| Polarity |
(+)ve
(-)ve Grounded system |
| Suitable |
Car,
Trucks, Tractors, Stationery Engines. |
| |
|
|
|
| Temperature
Gauges (Mechanical) |
 |
 |
 |
|
 |
| Type |
Vapour
Pressure, Bourdon (Imported) Capillary Type |
| Range |
40°-120°
c / 60°-210° c. |
| Sweep |
Concentric
/ Eccentric |
| Max Length |
7500
m.m. |
| Suitable |
Car,
Trucks, Tractors, Stationery Engines. |
| |
|
|
|
|
Oil
Pressure Gauges
|
|
|
|
| |
|
| Type |
Mechanical
Bourdon Tube Type (Imported) |
| Range |
0-5
kg / cm² - 0-16 kg / cm² |
| Sweep
Angle |
Eccentric
/ Concentric. |
| Suitable |
Car,
Trucks, Tractor, Stationery Engines Compressors. |
| Inlet
Connection |
Both
male female end connections can be provided. M12x1.5,
M10x1.0, M10x.1.25,
1/8" BSP, 1/8" NPTF, 3/8"X24 UNF-2B (Internal threading)
or as per requirement. |
| |
|
|
|
|
|
| |
| Application: |
| Provides
input to Low Oil Pressure Indicator when pressure drops
below safety level |
| |
| Option: |
| Diaphragm
type NO / NC (normally opened circuit or normally closed
circuit) |
| |
| Specifications: |
| Range |
Min.
0.3 kg/cm2
Max. 2.2 kg/cm2 or equivalent in PSI
max. working range 12 kg/cm2
|
| Earthing |
Negative
or Insulated |
| Mounting |
M10
x 1.0, M12 x 1.0
1/8" 27 NPTF or as per customer requirement |
| Operating
Voltage |
12
V / 24 V DC |
| Operating
Current |
3
W or 0.5 Amps max. |
| Operating
Temperature |
-20o
C to +120o C |
| |
|
|
|
| Fuel
Gauges / Tank Units (Sensors) |
|
|
|
|
|
|
|
|
| Type
|
NS
Type, Moving Magnet |
| Range |
Empty
'E' to Full 'F' |
| Sweep
Angle |
76°,
80°, & 55° |
| Voltage |
12v
/ 24v |
| Polarity |
(+)ve
(-)ve Grounded system |
| Suitable |
Car,
Jeeps, Trucks |
|
| |
|
|
|
|
|
|
|
ABS Moulded
Panels for Cars & Tractors. Wiring Harness Attached. |
| |
|
| Electrical
Temperature Gauges / Sender Unit. |
 |
 |
 |
 |
|
| Type |
Sender
Unit Brass Forged Machined, Ceramic Pallet Specially designed.
Electrical Temp Gauge based on NS Moving magnet design. |
| Voltage |
12v
/ 24v |
| Range |
40°
- 120° c |
| Suitable |
Car,
Truck. |
|
|
| Type |
Flexible
Drive Shaft, Layers of wound spring steel wire and duly Annealed
outer wound Flat Wire PVC Sheathed.
End fittings. Steel / Aluminium Nuts / Ferrules and Fastners.
Direction of Rotation can be clock / Anti clock wise. |
| Suitable |
Car,
Truck, 2 wheelers, Tractors. |
| Fittings |
Conventional
as well as JIS Types (Maintaining International Standards) |
| |
|
|
| Volt
Meter |
 |
 |
|
| Type |
NS
Type Coil Design |
| Dial
|
8-16
Volts with or without numericals |
| Sweep
Angle |
Eccentric
Movement |
| Voltage |
12V,
24V |
| Polarity |
(+)ve
(-)ve Grounded system |
| Suitable |
Car,
Trucks, Tractors, Stationery Engines. |
| |
|
|
|
Movement
Mechanism |
|
|
 |
|
| Company
can provide movement mechanism for following type of gauges
:- |
| (i) |
NS
Design Speedometer |
| (ii) |
Smith
Design for RPM/Hour Meter |
| (iii) |
Oil
Pressure Gauge Movement |
| (iv) |
Temperature
Gauge Mechanical Movement |
| (v) |
Electrical
Temperature / Fuel Guage Movements (Coil Types) |
|
|
|
| |
|
|
|
|
